It transmits a pulse signal to the main controlle

. , Enterprises and institutions, etc. The gearbox's reduction ratio, torque, output speed, power, transmission noise and other technical parameters are customized and developed according to customer needs.Most of the automatic induction doors are two types of translational induction doors and flat opening induction doors. After the induction door motor gets a certain operating current, it runs in the forward direction and transmits the power to the timing belt, and then the timing belt transmits the power to the spreader system to open the door leaf.

Because they do not need to be guarded, they can be automatically opened and closed when people enter and exit, so they are widely used in banks, shopping malls, and hotels with a large flow of people. The main structure of the induction automatic door motor is a gear reducer assembled by a transmission motor and a gear box, which has a deceleration function; the transmission motor provides speed and low torque speed output, and the gear box is connected to the transmission motor to reduce the speed and speed output of the transmission motor while increasing Torque (carrying capacity), which drives the induction automatic door to close and rotate and drive; the drive motor generally uses a DC motor or a permanent magnet motor as the drive source.

Among them, the induction door motor determines the opening and closing actions of the automatic door. The induction automatic door motors produced are used in the transmission of translational induction doors, side-opening, and rotary automatic doors. Motor has specialized in Ru0026D and manufacturing induction door motors for 20 years. Conversely, after the door leaf is opened, the controller makes a judgment.

The principle of the automatic induction door is: when the High-End Waterproof Motors induction detector detects someone entering, it transmits a pulse signal to the main controller, and the main controller informs the induction door motor to run after the judgment, and monitors the number of motor revolutions to notify the motor to accelerate or Enter slow operation.

They are mainly used in companies, office buildings, banks, units, Schools, airports, hypermarkets, supermarkets, specialty stores and many other scenes. If the door needs to be closed, the induction door motor is notified to move in the opposite direction to close the door leaf